In the end I think I will go with lei nielson. Why? Not because I think they are better or worse than the others. I think all would be more than sufficient. Lei nielson offers a range, are a little cheaper, and at the upcoming woodshow will be easy to purchase. Though there is something romantic about the hand tooling used to make the others.
Thursday, June 3, 2010
Choosing a tenon saw...
I'm looking for a medium size (12-14", 10 tpi) tenon saw both in crosscut and tip tooth configuration. In my opinion this is the most versatile saw for joinery work. Four have caught my eye. All from the states. The smaller adria saw is available locally. Any opinions out there?
Tuesday, June 1, 2010
Saturday, May 29, 2010
Back on your feet...
I'm making progress on the workbench. Over the past few weeks I completed the glue up of the base. I assembled it upside down to allow work on the base without having to manipulate the heavy top. This morning with a little bit of planning, levering and muscle power, it's back on it's feet. It's actually starting to look like a workbench now.
Thursday, May 6, 2010
Wednesday, April 28, 2010
Blanket Box for the Nieces
Design Brief
I wanted to make my two young nieces (under 5) a present for Christmas. Their mother suggested a blanket/toy box with the following specifications. Size 800mm wide, 400 deep, and 500 high. No sharp corners. A slow close mechanism for fingers. And it should be able to be used as a seat.
The Design
Inspired by Kerry Pierce's Pleasant Hill Shaker furniture, I've come up with what I think is a nice design.
More info to come.
Friday, April 23, 2010
Some tools are too nice to use...
"This VERY special set was made to order for a customer who wants nothing but the most amazing work possible. A 4" sliding bevel, and a 4" Try Square, made from Brass, Ebony, Damascus steel and whale tooth Ivory. The layered steel was hand forged by well known knifemaker Shawn McIntyre."
Saturday, April 17, 2010
The Sliding Leg - New Video
The sliding leg vice offers a great deal of versatility, offering the function of a twin screw vice, but at a variable screw to screw distant of up to 1.6m.
Feature 1 - Parallel Below the Shelf
The first problem I noticed with sliding leg vices is the parallel bar sliding along the shelf colliding with anything you were planning to store on the shelf. To overcome this, I put the parallel guide underneath the bench. To achieve this I reduced the height of the wheel brackets and raised the shelf. The trade off is to remove the vice you need to undo 4 bolts.
Feature 2 - Wheels
Typically people use a 'V' groove where the sliding leg moves wood on wood. My vice weighs 20-30kg, so this produced unacceptable friction. To overcome this I used 4 x 2" wheels.
Feature 1 - Parallel Below the Shelf
The first problem I noticed with sliding leg vices is the parallel bar sliding along the shelf colliding with anything you were planning to store on the shelf. To overcome this, I put the parallel guide underneath the bench. To achieve this I reduced the height of the wheel brackets and raised the shelf. The trade off is to remove the vice you need to undo 4 bolts.
Feature 2 - Wheels
Typically people use a 'V' groove where the sliding leg moves wood on wood. My vice weighs 20-30kg, so this produced unacceptable friction. To overcome this I used 4 x 2" wheels.
Friday, April 16, 2010
89.9 Degrees
89.9 degrees is a long way from square. Anyone who has tried fine joinery, wide case work, milling and drilling... in fact nearly all will find their task ruined by a bad square. My first square was a stanely combination. A very useful tool. The only problem is the slack in the bolt allows some slip and loss of square. My second square was $3 from super cheap auto.... hmmm.
Last year I decided to upgrade. Two tempted me.
The Incra single piece alloy (right, Professional Woodworking Supplies), and the Hand Crafted wood & brass Colon Clenton (left, HNT Gordon). However, after a chat with Christ Vesper, at last year's Sydney (june) I was convinced to hang out for a new model he was producing.
The stainless steel blade would not tarnish like the brass of the Clenton. They are not calibrate-able, like the Clenton. Although more expensive, they have that friendly warm, hand made feeling, unlike the laser cut incra.
I needed a good square before starting the main joinery for my roubo.
So back in July I ordered one.... I heard 8 weeks till... then by Christmas... and today...
"I have finished some urgent orders as a smallish test batch and everything went well. In between production of regular tools to keep stock and fill orders I am currently working on all my orders for full sets of three so sorry to say that your order for the TS7 Blackwood will come sometime after that. It will be some months away, my aim is to finish them by end of financial year. " - Chris
Now what shall I do? Wait? Clenton?
Tuesday, April 13, 2010
Boutique Timbers - New Website
Any feed back on site design, navigation, layout, information, etc I’d be more than happy to receive an email.
Tuesday, April 6, 2010
Handle Update

Some of you may remember a previous post, where I was looking for someone to turn the handles required for the bench. Old Pete from the Australian Woodwork Forums answered the call.
After a few emails back and forward debating design I came home to a rather nice parcel.
Not only did he turn two rather nice handles for the parallel bar pin, but also turned two alternative versions of the handles for the wheels. The timber is Australian Blackwood.
It also seems that Old Pete was right in his thoughts. He thought the handle would be a little thin at it's narrowest part. It feels right, but I agree looks thin.
Also, I had a user problem with my caliper. I measured the metal rod at 10.5mm, Old Pete read the instructions and thought it was 9.5mm... and indeed it is. Which means that the 60 holes I drilled and sanded in the two parallel bars... are too big.
Subscribe to:
Posts (Atom)









