Monday, November 1, 2010

Shopping for Radiata Pine (Pinus Radiata)


With three to four projects to get out before Christmas, it's time to get cracking. The first of the practical steps is purchasing the timber. These projects won't require boutique or expensive timber. They just need timber to be relatively clear and reasonably priced. I went to the Big B (Bunnings) and got some prices on Radiata Pine (Pinus Radiata Wikipedia). Now I jot out my projects, make a cut list, borrow a trailer, and get some timber... once I clear some room in the shed.


Radiata Pine DAR (Dressed All Round) at 19mm thicknesses
Width 
1.8m
2.4m
3.0m
290 mm
$20.71
$27.63
$34.51
240 mm
$13.95
$18.59
$23.28
190 mm
$10.90
$14.45
$23.28
140 mm
$7.27
$9.68
$12.10
90 mm
$4.40
$5.52
$7.41
70 mm
$2.74
$3.65
$4.56
42 mm 
$2.27
$3.02
$3.78


Radiata Pine DAR (Dressed All Round) Squares
42mm x 42mm x 1.8m - $6.23
70mm x 70mm x 1.8m - $18.55
70mm x 70mm x 2.4m - $25.39
90mm x 90mm x 2.4m - $36.18

Structural Pine 
90mm x 45mm x 3.0m - $9.45
70mm x 45mm x 3.0m - $8.35
70mm x 45mm x 3.0m - $6.70
70mm x 35mm x 3.0m - $6.45
70mm x 35mm x 2.4m - $5.12

Blackbutt Decking
86mm x 19mm x ? - $4.35/m

Cyprus Pickets
~70mm x 19mm x 1.8m - $3.15


Previous Projects in Radiata Pine



Click for details: Radiata Pine Bedside TablesClick for details: Radiata Pine Coffee Table
Click for details: Radiata Pine DVD Shelf mk. 2Click for details: Kitchen Bench Replacement

Credits
Opening photo taken from Wikipedia - 

Thursday, October 28, 2010

Maker's Mark

At the start of July 2010, I ordered 30 custom made brass plates to label my furniture projects (see blog post.) Today, just under 4 months later, they arrived, and don't they look snazzy.



Despite being a little slow, Vidi at Maker's Mark lived up to his reputation with great product and service. (Though I thought I ordered the smaller 25mm version.)

Sunday, October 24, 2010

Wenzloff & Sons: 9" Dovetail

I'm not usually one to get excited about a new high quality hand tool... oh wait... that's not true.. I am. Today I finally took receipt of what will become a prized tool in my collections, a Wenzloff & Son's 9" Dovetail Saw.



Wenzloff & Son is a family based business that produce a variety of saws based on traditional design. Although machines are used in the manufacture the process is very labour intensive. The teeth are handset and filed (sharpened) and the handle is hand finished and sanded. A serious piece of woodworking equipment.

The saw I selected was purchased from Lee-Valley and is based on the Harvey Peace original (I think). Made from Swedish spring-steel 0.020" thick, it has about 0.006" of total set to give a kerf of just 0.026". It measures 13-3/4" overall with a 9" blade and 1-3/4" cutting depth. Weighs 11 oz. Giving near exact statistics as the equivalent Lie-Nielson (the company that made my tenon saws) and slightly longer than the Adria.

It feels well balanced, and comfortable in the hand. With three projects requiring a variety of dovetails lined up for Christmas this little beauty is going to get some use.




Saturday, October 16, 2010

Harold & Saxon Chisels


Australian Company Harold & Saxon Chisel & Tool Co. make the finest chisels in the world. Each chisel is made to order by a bloke named Trent  in Oxenford Queensland. At the Melbourne Timber and Working with Wood Expo this weekend, like the Sydney Show, the company forms part of the Australian Quality Tools stand.  The range includes bevel chisels, mortise chisels, heavy duty mortise chisels (big stickers), and a new premium range (with ferules of titanium or gold plate.) 

The above photo from this weekend's expo, posted on the Woodwork Forums, is a complete set made over two years for forum member KevJed. I count 31 chisels including pairing skew chisels, bench chisels, mortise chisels, custom mallet, and leather strop.

I think it's time to upgrade my $20 for 3 Irwin chisels.

Other Woodwork Forum Gloats



Wednesday, October 13, 2010

Tool Review: Makita 4351FCT Jigsaw


Earlier this year I purchased a Makita 4351FCT Jigsaw from Sydney Tools. Official Stats: Length of Stroke 26mm, Max. Cutting Capacity 135mm (wood) & 10mm (steel), Angle cutting -45-45. Continuous Rating Input 720W, Strokes per Minute 800-2,800, and Weight 2.4kg.



I needed a tool to make some curved cuts and rough cuts in a safer manner than using a circular saw on a non-flat slabs. A bow-saw is romantic but I'd have to build it, and I was in a hurry. A bandsaw would be great, but they're a bigger investment than what I was after.

Makita is my preferred brand for power tools. I find them simple, rugged, powerful, and well built. I chose the 4251FCT as it had variable speed, a high wattage of power, and the pistol (cf: D shape) handle.

So how does it perform. 

Pros.  It fulfilled the job it was bought to do and was very handy in rough cutting from slabs and refining the curve in milled pieces. It is indeed a powerful unit, well capable of making the 50mm deep cuts into hardwood. The handle design is very comfortable and makes the tool easy to control. Vibration is well controlled. It comes with a sturdy case. Sydney Tools were easy to deal with and provided prompt delivery.


Cons: I had some initial trouble with blades. I found they weren't cutting at 90 degrees but rather bending and cutting angles. This resulted in a ruined piece of wood and a several snapped blades. Eventually I bought some Bosch hardwood blades which worked well. It lacked several important accessories. A circle cutter, parallel guide, and dust extraction hood are listed as options, but are not included and not easily available. In tougher timbers the vibration although still tolerable was significant. Although a 135mm cutting depth is advertised I doubt it could be done safely with any precision.

So am I happy with it and would I buy it again?

Yes, and yes. It's simple and works. It does what it was made for and nothing more. I was disappointed most by the lack of accessories.

Saturday, October 9, 2010

Planing Cats


Phil over at Blended Woodworking posted this diagram on the theory of hand planes.

Saturday, October 2, 2010

The Love of Wood - Photo Shoot

I've been asked to take a few photos to represent 'the love of wood'. I tried to combine the elements of woodworking and technology and came up with these. If you have any other creative suggestions let me know by Monday and I'll see what I can do.





Thursday, September 30, 2010

Response from Oneida Air

Hi Daniel,

 Thank you for expressing interest in our systems we are glad to hear you are considering us as an option despite the fact that we are so far away. There may be different options for shipping, the least costly option would probably be to look into a freight forwarder however I will give you the UPS rate to ship it directly from us to you. You will receive Practical after the sale service, as well as anyone who lived in the United States. We actually just have one facility in Syracuse, New York so we do all of our consulting, designing and trouble shooting from this location no matter where you are in the world. The 50hz units are compatible in Australia.

  1. 1.       The Super Dust Deputy would cost $289.00. If shipped via UPS the cost would be $523.24
  2. 2.       The 50hz model is compatible in Australia. I have attached information on the 2hp 50hz V system. It would look slightly different…. This is an old picture. See the current web picture of the V system for actual design. Pricing is included in the document. Shipping to your post code via UPS would be $2817.93.


Again, your best option is to check with a freight forwarding company. If you do check, I would be very interested to hear the pricing that was determined. If you are interested in the galvanized steel cyclones for a 2hp/1500 cfm dust collector you would use the C950 cyclone.  The cost for that cyclone is $446.52. Shipping to your post code would be $1173.85

Please feel free to contact me directly with additional questions about any of our units or concerns about dust collection in general. I look forward to hearing your feedback.

Thank you,
D B
Oneida Air Systems Inc.
1001 W. Fayette St.
Syracuse, NY 13204

 

Monday, September 27, 2010

Tablesaw Safety: How to Use Kickback for Laying Out Joints

Ever heard of kick back? If you haven't you should never use a table saw.
Check out this post over at the Wood Zealot's Worshop Blog. 
A great example of a terrible way to mark out dovetails.



Saturday, September 25, 2010

Dust Extraction - Cyclone Suppliers

Dust!!!
If you are wondering why the photos of my shop were blurred... It's not a camera problem, it's the flash reflecting of the dust in the air. I admit it, I have a serious dust problem. My 1HP carbatec dust extractor is just going to cut it. In fact often it's so clogged up with chips from the thicknesser they just pile up on the floor. In the next few blogs I'll be exploring dust extractors and air filters as I try to get my shop cleaned up.

Oneida Air Systems - website - US$700-3500
Maker of the very well regarded Dust Deputy, American company Oneida Air is one of the premium names in the world of cyclones. However, they are only available in the USA. Although they could be imported there would be considerable cost in shipment and electrical compatibility issues.


Carbatec - website - AU$2000-2700
Carbatec sells two styles of cyclones in 2 & 3HP. As far as I can gather these are re-branded Taiwanise machines. The great advantage of these is I can take my trailer to Carbatec, swipe the magic plastic, and it's done. What makes me hesitant (other than cost) is that a search of the forums and google reveals little in the way of people's experience with these machines.

Bill Pentz - website - free
The most famous name in the world of cyclones is Bill Pentz. This man is regarded as a cyclone expert, who has done to the research and the maths to calculate the optimal design. Although the information is free it is at the end of the day only information and plans. I still need to gather materials and have time to build the thing. Without electrical and metal working experience, that's not as easy as it sounds.


Clearvue - website - US$1640
Clearvue is an American company that builds perspex Cyclone units and components based on Bill Pentz design. They can be imported to Australia. Apricotripper's (from the Woodwork Forums) imported and installed a Clearvue (below right) (link). There was a rumour earlier in the year that they were closing down.



Sheet Metal Fabricator
Another alternative would be to hire a sheet metal fabricator to custom build the Bill Pentz design. Although this would be expensive when compared to the high cost for the above units... it may be a serious option.


Like at Facebook

Redbubble