Projects for 2010

Despite it being the end of March and I'm still working on 2009 project I've been busy planning a few projects for 2010. Feel free to post comments and suggestions.


Shaker Style Blanket Box
The first project, is a Christmas present for my two nieces (1 and 4). I wanted to make them a small project, and my sister thought a blanket/toy chest would be great. The only design stipulations were the size, couldn't have any sharp corners, cant jam their fingers and they should be able to sit on it.


Kerry Pieces's book on Pleasant Hill Shaker Furniture has an article on a classic little box which will form the basis of my design. To provide a nice seat to the top, I plan to ask mum, (an avid patchworker) to make a nice patchwork cushion which can be attached by press studs epoxied to the underside of the top. I need to research hinges. Timber will most likely be radiata pine. As for finishing; I limewash and varnish.

Images: Pine Bottom Chest by RDiaz at Fine WoodWorking

Shaker Style Trestle Table

I have a selection of fiddleback and plain Tasmanian Mrytle set aside for this project. This will be my second attempt at a shaker style table. I learnt a few things the first time around, and am looking forward to trying some new techniques. The fiddleback boards are only 1", and will be edged with 4" of 1 3/4" plain myrtle, and re-enforced with the wood to join with the leg. I'm considering using bent laminations rather than solid timber for the curved leg for increased strength on the short grain. The chairs will be a whole other issue.

Classic Bookcase

The bookcase will be a wedding present for a friend. I plan to use more classical joinery and techniques including (mitered) dovetails, hide glue, mortise and tenon frame construction, and french polish finish. As well as modern knife hinges, and glass panels. The plan is for nice figured red cedar sides and top, plain ceder shelving, and a pale silver ash tongue and groove backing. This project should also include a secret drawer.

Drill Press Upgrade

I have a 3/4hp carbatec drill press which needs an upgrade from the ridiculous tidy table. The plan is, with inspiration from Australian Wood Review, to make a table the height of my workbench, and then make a mechanism to allow the drill to move up and down. Fun times.

Shaker Table on LumberJocks

This is project I completed a couple of years ago. Just uploaded to LumberJocks.

Scrappy Hearts Coffee Table

Timber: Radiata Pine and Tasmanian Oak.
Finish: Feast Watson – Baltic Pine Stain + Satinproof + Find Buffing Oil
Glue: Aquahere PVA
Design: Modified from Scrappy Hearts Table Runner

Tasmanian Blackwood Bedside Tables

Timber: Tasmanian Blackwood (with sapwood feature), Huon Pine

Finish: Organoil Hard Burnishing Oil

Glue: Titebond II

Design: Original

Today's the day...

Today's the big day. Delivery of the table.

Once I screw down the top its complete.

Only challenge now is to fit it all in the back of the car... All those years of tetris will finally pay off.

Here's some pics.

When I've got more time I'll do a write up and talk about what I would have improved.

Feel free to post comments or email me any suggestions or comments.